Series 03 · Model S03 · SRDLF Series

Refrigerated Meat Merchandiser D Series

Stainless inner liner, copper condenser and a high-transparency roller shutter that locks in temperature and keeps dust and insects out.

Temp range

-3 - 3 °C

Front rail

—

Standard models

5

Power

220 V

Refrigerated Meat Merchandiser D Series — SRDLF series cabinet

SRDLF series · 5 standard models · 2026 catalogue

Model specifications

SRDLF standard sizes and dimensions

Dimensions are length × depth × height in millimetres, taken from the 2026 SEEBERR catalogue. Non-standard lengths, 60 Hz electrical input and project-specific rack configurations are built to order.

Model Dimensions (mm) Temp (°C) Volt (V) Rail H (mm)
SRDLF-DCG-18 1875 × 1100 × 980 mm -3 - 3 °C 220 V —
SRDLF-DCG-25 2500 × 1100 × 980 mm -3 - 3 °C 220 V —
SRDLF-DCG-29 2900 × 1100 × 980 mm -3 - 3 °C 220 V —
SRDLF-DCG-37 3750 × 1100 × 980 mm -3 - 3 °C 220 V —
SRDLF-DCGZJ-14 1450 × 1450 × 980 mm -3 - 3 °C 220 V —

Lengths available in this series: 1875 / 2500 / 2900 / 3750 / 1450 mm. Custom lengths on request.

Planar drawing

Cross-section and plan, all dimensions in mm

The drawing is the factory planar view for the SRDLF series. Use it for aisle planning, service clearance and connection routing; we issue DWG / BIM files with project quotations.

Request DWG / BIM files for store layout
SRDLF series planar drawing with dimensions

SRDLF · planar view · dims in mm

Detailed description

Refrigerated Meat Merchandiser D Series

Stainless inner liner, copper condenser and a high-transparency roller shutter that locks in temperature and keeps dust and insects out.

Front closure

Roller shutter

Holds cold, keeps dust and insects out

Food zone liner

Stainless steel

Food-grade, fast cooling, easy wash-down

Condenser

Copper / aluminium

Copper tubes with expanded aluminium fins

Deck band

-3 - 3 °C

Meat, seafood, vacuum packs

Where the A and B counters trade display area for an open deck, the D series closes the front with a high-transparency stretchable roller shutter. The shutter is the point: rolled down it locks the temperature in, holds the cold and keeps dust and insects out of the product, so the counter can carry stock between services without being emptied or covered by hand.

Under the shutter the food zone is lined in food-grade stainless steel rather than painted steel - it cools faster, takes knocks and abrasion from trays and knives better, and washes down clean, which is what a meat counter has to survive daily. The carcass is 1100 mm deep and 980 mm high in four lengths, 1875 to 3750 mm, with a 1450 × 1450 mm corner module.

The refrigeration side is built around a copper-tube condenser with mechanically expanded aluminium fins, chosen for heat rejection and for corrosion resistance, driven by a branded compressor. The deck holds -3 - 3 °C, the band used for seafood, fresh meat and vacuum-packed product The liner also drives cooling behaviour: steel of this kind takes heat out of a fresh load faster than a painted one, so a counter loaded with product that has been out of the chiller recovers its band without the compressor running flat out.

Control is a microcomputer unit built around a self-developed chip, with a simple operator interface: set the band, read the temperature, and let the shutter and the lighting circuits be switched independently of the cooling. Every model runs on 220 V and the whole range shares one footprint grid, so a shuttered counter can be dropped into an existing A or B run.

Applications

Where this range is specified

  • Butcher counters between services
  • Markets and open-front food halls
  • Fresh meat with overnight stock
  • Counters needing insect protection

Compliance

Certifications & testing

CERoHSISO 9001ISO 14001CVC3C

Seeberr holds 3C, CVC food-contact safety, ISO 9001 quality management, ISO 14001 environmental management and China environmental-protection / energy-saving product certification. Export cabinets carry CE conformity marking and meet RoHS restrictions. Certification copies and test reports are available on request.

Direct factory inquiry

Request quotation & engineering support

Send the store layout, required lengths and target temperature. The assigned application engineer replies within 24 hours.

Direct phone & WhatsApp: +86 155 5438 1555