Series 03 · Model S04 · SRE9BN Series

Curve-Front Deli Case / Meat Merchandiser

Curved glass serve-over case with a liftable front glass, sliding rear access and a large under-counter refrigerated store.

Temp range

-2 - 4 °C

Front rail

—

Standard models

5

Power

220 V

Curve-Front Deli Case / Meat Merchandiser — SRE9BN series cabinet

SRE9BN series · 5 standard models · 2026 catalogue

Model specifications

SRE9BN standard sizes and dimensions

Dimensions are length × depth × height in millimetres, taken from the 2026 SEEBERR catalogue. Non-standard lengths, 60 Hz electrical input and project-specific rack configurations are built to order.

Model Dimensions (mm) Temp (°C) Volt (V) Rail H (mm)
SRE9BN-SSG-18 1875 × 1000/1200 × 1250 mm -2 - 4 °C 220 V —
SRE9BN-SSG-25 2500 × 1000/1200 × 1250 mm -2 - 4 °C 220 V —
SRE9BN-SSG-29 2900 × 1000/1200 × 1250 mm -2 - 4 °C 220 V —
SRE9BN-SSG-37 3750 × 1000/1200 × 1250 mm -2 - 4 °C 220 V —
SRE9BN-SSGZJ-16 1680 × 1680 × 1250 mm -2 - 4 °C 220 V —

Lengths available in this series: 1875 / 2500 / 2900 / 3750 / 1680 mm. Custom lengths on request.

Planar drawing

Cross-section and plan, all dimensions in mm

The drawing is the factory planar view for the SRE9BN series. Use it for aisle planning, service clearance and connection routing; we issue DWG / BIM files with project quotations.

Request DWG / BIM files for store layout
SRE9BN series planar drawing with dimensions

SRE9BN · planar view · dims in mm

Detailed description

Curve-Front Deli Case / Meat Merchandiser

Curved glass serve-over case with a liftable front glass, sliding rear access and a large under-counter refrigerated store.

Front glass

Single arc

No reflection line across the face

Counter height

1250 mm

Display sits above the counter line

Access

Lift front / push rear

Load from either side

Air path

Double duct

Catalogue: 15% lower consumption

  • Double duct design
  • Energy saving by 15% - Lower energy consumption
  • Three-sided glass with ultra-large capacity

A curved front does two things a straight front cannot: it removes the reflection line where two panes meet, and it brings the far corner of the counter into the shopper's eye line. This case uses a single large arc of glass across the display face for exactly that reason, and keeps the serve-over counter behind it.

The body is 1000 mm or 1200 mm deep and 1250 mm tall - tall enough to carry the display above the counter line - in four lengths from 1875 to 3750 mm, with a 1680 × 1680 mm corner unit. The arc glass lifts from the front and the rear glass pushes aside, so the case can be loaded from the customer side or the service side depending on where it sits in the floor plan.

Below the display deck sits an ultra-large refrigerated store, which is where this format earns its keep in a deli: the stock for the next few hours lives in the counter rather than in a walk-in, so a single operator can serve and replenish without leaving the station. The food zone runs -2 - 4 °C for seafood, fresh meat and vacuum-packed product.

Sliding-door versions are supplied in left-hand and right-hand configurations, and the double-duct air path is credited in the catalogue with a 15% cut in consumption. Soft top lighting, a microcomputer controller and a control box that slides out on slides finish the specification; all models run on 220 V.

Applications

Where this range is specified

  • Deli, cheese and cold-cut service
  • Fresh-meat counters in sight of the aisle
  • Seafood display under arc glass
  • In-store bakery and pastry counters

Compliance

Certifications & testing

CERoHSISO 9001ISO 14001CVC3C

Seeberr holds 3C, CVC food-contact safety, ISO 9001 quality management, ISO 14001 environmental management and China environmental-protection / energy-saving product certification. Export cabinets carry CE conformity marking and meet RoHS restrictions. Certification copies and test reports are available on request.

Direct factory inquiry

Request quotation & engineering support

Send the store layout, required lengths and target temperature. The assigned application engineer replies within 24 hours.

Direct phone & WhatsApp: +86 155 5438 1555